CSP Stocklist          CSP HOME

USED EQUIPMENT AVAILABLE AT CUSTOMERS PLANTS.   If you don't see what you are looking for please contact me.

E-MAIL me for pictures or details.     Scroll down for complete list.


  COLT CERFS-25-12Littell 4000 lb reel

Rowe 10,000lb x 36 x .110


Contact Robb Hewitt,   519-247-9994,  rhewitt@cspequpiment.com

SURPLUS EQUIPMENT   offered by CSP Equipment Inc.
Manufacturer Description Model

ROWE 10,000 lb x 36" wide x .110, Reel, Car, Staightener, thread table. 
EMAG Cut-To-Length, Slitting Line, 60" x.105, 30,000 lbs. Controls update 2003
TG  TG Air Dryer,  825 SCFM @ 100 psig,  575v TG750A
Atlas-Copco 150hp Air Compressor, 575v GA110
Littell 4000 lb x 20" Reel. Motorized, 14"-22"ID. 54"OD, 575v,  No 4.
COLT 12" x .080" servo feed/stnr. 2" x .177 with 575v trans. CERFS-25-12
Knoll Coneyor, beltless magnetic, 13.5" wide, 18'OAL, 7' OAH, 460v
Bliss 65 ton OBI Press. A/C
Rowe Cradle Straightener, 8,000lbs x20" wide x .165" thick  C/8-20/8-J
Straightener CWP, Durant, 8" wide, 10" wide. 7 rolls.
Coil Cradle 3000 lbs. 12" wide With or without straightner.
Mecon 18" wide x.225" servo feed. 4" rolls, pull thru strn, stand. 4FS-18
SM Cyclo Motor 3 hp. 1750 rpm input, 70 rpm output, 230/460v, reducer CNHM3-6120YB-25
Dallas Air Feed, 2" bore 18w x 36 stroke.  2.5" bore, 18w x 24" stroke. Stnr. Cab
B&K  6000lb Hyd Reelx 24" wide, 48' OD backplate, 60" will fit.14.5-20.5" ID 
Littell 8" wide x .018 stnr 308
CWP 6" wide 17 roll stnr.   460v.  V6171110
CWP 6" wide 7 roll stnr.  6B
AirFeedsInc 30" wide x .250"thick Power Stnr, 5" rolls,  s/n791212 5P10
Macrodyne 500 ton, 88"x 84", 64" daylight, 24" stroke, 40" shut ht. 
COLT 3000 lb x 30" w , reel, 575v, motorized.
LNP Cradle / Strnr, 8000 lb x 24" wide.?
Brown Boggs 80 ton SS press, 72 x 28" bed, 4" stroke, 10" windows, 80 spm 80-2P
Mecon 12" x .125"  servo feed, 2.5" rolls
Brown Boggs 80 ton  80-2F, 2" str, 36x25bed, 70-140spm,
Brown Boggs 110 ton OBI, 6" str.,  42" x 27" bed, 35 spm, wichita clutch,  cushion. 20LJ







Parts for Waddington Electronics Servo Feeds in stock in Strathroy.    Used Pacific ScientificServo Motor  (1)  R67   and (1) R33 .

Parts for Air Feeds in Stock. Springs, U cups, etc.

Turck Cables, for LS10 light curtains.  4M, 3 and 4 pin.

Kosmek QDC Hydraulic lever clamps, GB0250,  call for dimensions.

Barksdale Valve for Magnum Hydraulic press.  96201-BB2-T2

Numatic air feed valve parts :  SPA40-K2 repair kit,  227-835 coil, 228-588 coil.

ISB light curtains,  Lights only, need controller, M2012,  12"

Masa resolvers for PLS's. Also works on Toledo PLS's

Bunting Magnetic Sheet fanners, SF1109, for .015 - .050 thick.

MAG Line Safety Ram blocks,  24" tall.